Medical automatic door often appear false fault analysis

The use of medical automatic door is more and more common.The induction control system can realize the automatic opening and closing of the door, which greatly facilitates our daily life.Of course, it can fail, and it often fails incorrectly.Yuan medical automatic door manufacturers will introduce the following situation and how to deal with:

The first common pseudo-fault: automatic medical doors do not stop or close whether people pass or not.

1. The possible sensing range of the detector is the entry of moving objects, such as pedestrians, vehicles, or even waving flags;

2. The detection range of the sensor may be too small.When the door is closed, the probe and sensor detect that the door is active. The mistake is that the moving object passes through and the door opens again.

3. It may be that the upper beam plate of the fixed induction probe is loose, and the manufacturer of the operating room door causes the probe to shake, so that the door door does not stop switching.

The second type of common pseudo-fault: when the medical automatic door during the operation loud, this fault is mainly due to the automatic door has been used for a long time.

The wheels of the door spreader have worn out for a long time.If there is only minor wear, track and wheels can be cleaned.You can also add a little oil to the wheel bearings, but not on the tracks and plastic wheels.Oil, because the oil is easy to vacuum, so that the wheel damage faster;

2. Some metal connectors are loose, smooth automatic door machine series only need to be re-strengthened;

3. There is friction between the movable door fan and the fixed door fan, resulting in noise;

4. Damage to the downguidance system will also cause loud noise;

5. The upper beam does not work well during the initial construction, the single open/son/mother manual door or resonance with the ceiling.