Ningbo Dorcoo Automatic Door Co., Ltd.
Tel:0574-88167021
Fax:0574-88167023
E-mail:dorcoo@dorcoo.com
Website: www.dorcoo.com
Post code:315104
Address: No.577 Fuqiang Rd,Yinzhou district,Ningbo,China
Website : en.dorcoo.com
Airtight automatic door hanger for the maintenance of medical airtight door has the following points:
1, the light box in the medical work should be regularly on the industrial door dust cleaning, keep the industrial door and glass, hardware clean and bright.Because even if the stainless steel, once contaminated with dust, dirt, the chemical substances will corrode the surface of stainless steel, in the long run, will make the steel body bad, rotten, affect the operation of the radiation protection automatic door performance.
2, translation, automatic door hanger once the radiation protection and oil pollution on the automatic door is difficult to clean, can swab with clean, bright, and the best do not use strong acid or alkali solution for cleaning, such not only easy to make profile surface finish is damaged, can also destroy the protective film on the surface of the metal pieces and oxide layer and cause the corrosion of metal pieces, especially when some customers with metope of sulfuric acid cleaning, must pay attention to don't let the door window is affected.
3, should be timely cleaned the box inside the granular debris, so as not to block the drainage channel and cause drainage and leakage phenomenon, the consequences of serious will also affect the operation of the radiation protection automatic door, shorten the life of the automatic door, and there are safety risks.
4, when opening industrial door, the intensity should be moderate, try to maintain the speed when opening and closing even.
5, usually in and out of the automatic door, avoid hasty, ramming, as far as possible to avoid hard objects hit the radiation protection automatic door or scratch the profile surface.
6, air-tight automatic door hanger in the use of industrial doors in the use of the door is not flexible or other abnormal conditions, should timely find the reason, if the customer themselves can not eliminate the fault, should timely contact with the radiation protection automatic door manufacturers or suppliers, so that the fault can be eliminated in time.If the automatic door did not get timely maintenance, should be suspended to avoid accidents