Does operating room door manufacturer contact signal have a few kinds?

Does operating room door manufacturer contact signal have a few kinds?Operating room door is the most commonly used door in the hospital, including airtight door, automatic door, induction door and mother-in-law door.Airtight door hospital is a place with high requirements on all aspects, so the selection of materials for these doors is very high.Important.Then there are several contact signals of the general operating room automatic door.Operating room automatic door contact signals can be divided into two types: commonly used microwave radar and infrared sensors.

Radiation-proof airtight automatic door microwave radar is the object of displacement response, so the response speed is fast.Suitable for people with normal walking speed.The feature is that once the person near the door does not want to go out and is stationary, the radar will no longer respond.Automatic door closed, the door has a certain protective effect.The infrared sensor responds to the presence of an object and transmits contact signals whenever it is within the sensor's scanning range, regardless of whether the person is moving.The disadvantage is that the infrared sensor has a slow response time, which is suitable for people who move slowly to and fro.In addition, if the induction automatic door receiving contact signal time is too long, the controller will consider the signal input system in the obstacle.Electrical components can also be damaged if automatic sliding doors remain open for too long.

Heavy anti-radiation automatic door because microwave radar and infrared sensors do not know close to the induction of automatic door people really need to enter, so sometimes button switch is the first choice.Button switch can be contact button, elbow touch switch more convenient.The elbow switch is very durable, especially if it can be operated with the elbow.Avoid touching hands.There is also a so-called foot switch, which has the same function, but requires high waterproof requirements, and the pedal strength is very strong, it is easy to make foot switch failure.There is also a handle with a contact switch that provides contact signals to the door when the handle is pushed (or pulled in the opposite direction).Does operating room door manufacturer contact signal have a few kinds?

Today, the word self-control sometimes makes special demands, such as using a line of the telephone to control the opening of a door.To do this, just make sure that the signal is a passive contact signal.In rare cases, people will ask for antenna remote control.The wireless receiver can contact with the induction automatic door, and can use the wireless transmitter to meet the requirements.However, there are now so many radio sources that it is often a problem for doors to open accidentally.

Above is the operating room door manufacturers of contact signals.Wood ward door/department door whether you have a certain understanding through the above introduction, hope the above introduction can help you.Your support is our biggest motivation!If you have any questions about this, welcome to call us, we will answer!Thank you for your attention and support to our company!