DK300 Automatic door controller

1, check the need to install the airtight door, check the airtight door and whether the switch is flexible and smooth.DK300 automatic door controller

2. Put the door into the door hole (remove the door leaf if necessary), make the inner contact surface of the edge of the package fit the wall and perpendicular, and correct the surface of the wall surface if necessary.

3. Vertical positioning of the side frame of the hinge position must be done so that the point plane is on the same plane.

4. Retainer the side frame at the hinge position. Make sure that the retainer or retainer piece is fixed firmly.

5, adjust the lock position wide body vertical position, so that the gap between the door and the door frame position to achieve uniform, and do the final fixation.

6. Carry out protective examination. The staff shall conduct blood routine examination once a month and systematic physical examination once a year.The introduction of the airtight door is the above, I believe you can know after reading, hope this article can be helpful to you, if you have any questions about this, please contact us.

7, can take shielding protection and distance protection principle. Shielding protection refers to the use of a higher atomic number material, lead or lead material, commonly used as a barrier to absorb unnecessary X-ray. Distance protection is refers to the use of X-ray exposure quantity and is inversely proportional to the square of the distance from this principle, by increasing the distance between the X-ray source and the human body to decrease exposure to shoot.