DK200 Automatic door controller

Airtight door manufacturer calls lead board door again.Air tight door is divided into: open air tight door, push and pull air tight door, rotating air tight door, plug type air tight door, combination of air tight door.

(1) open the air-tight door horizontally.DK200 automatic door controller

It is mainly used in places where ray intensity is relatively weak and air tightness is required, and it is generally used in the entry and exit channels of personnel. In this type of places, the shielding layer thickness is generally small, and the channel size is not big and air tightness is required. The opening method can generally be manually opened.

(2) push and pull the airtight door. 

It is mainly used in places where ray intensity is relatively strong and there is no requirement of air tightness. It is generally used in the outer door of mixed access channel or special logistics channel. The space outside the channel is large, the thickness of shielding layer is relatively large, the channel size is large and there is no requirement of air tightness. 

(3) rotating airtight door. 

High quality automatic door belt rotating ray protective door is generally used in the places with strong ray intensity and small external site, generally as the inner layer of ray emitting device protection.The site has a higher dose level and smaller space, so it is not suitable for the installation of push-pull ray protective door and open ray protective door. 

(4) plug type airtight door. 

Heavy automatic radiation protection door type ray protection door protection ability is very strong, can reach a few meters thick shielding layer.Used chiefly in places where neutrons or high doses of gamma are prevented. 

(5) combination airtight door. 

Ordinary radiation protection in the process of the automatic door design can be combined according to the characteristics of different radiation protection door to choose, such as using flat open door easy to design the characteristics of gas tightness, push-pull ray shielding door is easy to design requirement of the features are combined, not only can reduce the design difficulty, and under the condition of meet the technological requirements to minimize the investment